notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 2 50 ? 20 watt 30 to 520 mhz rf transformer surface mount SYTX2-52HP-20W+ case style: ah1647 the big deal ? high power handling, 20w ? low insertion loss, 0.8 db typ. ? small size, 0.43 x 0.69 x 0.42 product overview mini-circuits SYTX2-52HP-20W+ is a high-power, surface-mount transformer with a secondary/primary impedance ratio of 1:2, covering the 30 to 520 mhz band. with proper heat sinking, the transformer is capable of handling rf input power up to 20w. it provides low insertion loss (0.8 db) as well as good matching vswr1.25:1. featuring core and wire construction mounted on a printed laminate base, the unit comes enclosed in a miniature, shielded package measuring just 0.43 x 0.69 x 0.42, ideal for dense circuit board layouts. key features feature advantages high rf power handling (20w) supports systems with high power requirements in small device size. low insertion loss, 0.8 db provides excellent transmission of signal power from input to output. good return loss, 18 db typ provide good in to output impedance matching. small footprint, 0.43 x 0.69 x 0.42 accommodates tight space requirements for dense pcb layouts.
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 2 frequency (mhz) insertion loss (db) primary r. loss (db) outline dimensions ( ) inch mm maximum ratings pin connections features ? military mobile ? pcs ? balun ? diode matching primary (50 ohm) 4 secondary (25 ohm) 1 ground 5 not use 8 case ground all others ? high power input, 20 watt max. ? low insertion loss, 08 db typ. ? small size, 0.43 x 0.69 x 0.42 applications operating temperature -40c to 65c case* storage temperature -55c to 100c rf power 20w rev. a m164707 SYTX2-52HP-20W+ ed-16042201 ig/cp/am 171107 typical performance data outline drawing confg. d *case temperature is defned as temperature on ground leads. ?permanent damage may occur if any of these limits are exceeded. electrical specifcations at 25c 1. the user must provide adequate means of heat removal to limit the temperature of ground connections under the pcb to +65c, in order to ensure proper performance. at 25c ambient temperature this requires thermal resistance of the users pc board heat sink to be 2c/w. parameter frequency (mhz) min. typ. max. unit impedance ratio (secondary/primary) 2 frequency range 30 520 mhz insertion loss 30-520 0.8 1.5 db return loss at 50 ohm 30-520 13 20 db power handling at primary 1 30-520 20 watt 0.0 0.5 1.0 1.5 2.0 30 130 230 330 430 530 insertion loss (db) frequency (mhz) sytx2 - 52hp - 20w+ insertion loss 0 10 20 30 40 50 30 130 230 330 430 530 return loss (db) frequency (mhz) sytx2 - 52hp - 20w+ input return loss 25/50 ? 30 to 520 mhz 20 watt rf transformer surface mount SYTX2-52HP-20W+ case style: ah1647 sugges t ed l a y o ut, t o l e r a nce t o b e w i t hi n . 002 pcb l an d p atte r n a bc e fgh j k .433 .690 .415 .100 .476 .394 .045 .060 .276 11.00 17.53 10.54 2.54 12.09 10.01 1.14 1.52 7.01 lmnpqrstwt .194 .257 .560 .475 .561 .258 .069 .061 grams 4.93 6.53 14.22 12.07 14.25 6.55 1.75 1.55 2.80 30 0.15 19.13 100 0.37 21.81 200 0.51 26.31 300 0.64 39.26 350 0.72 35.76 400 0.82 26.92 425 0.88 24.12 450 0.95 21.71 500 1.11 17.88 520 1.19 16.58 +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
